Part Number Hot Search : 
DT74FCT3 CAT14002 LH1529GP MBR7100 CA3030 C2383 498B685M FG1001
Product Description
Full Text Search
 

To Download S1117 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 PRELIMINARY
S1117
Features
Adjustable and Fixed of 1.8V, 2.5V, 2.85V, 3.3V, 5V Space saving SMD types of SOT-223 and D-Pak(TO-252) 1.1V Drop-out Voltage 1.0A Output Current Current Limiting and Thermal protection Over Current Protection. Ouput trimmed to 2% Tolerance Fast Transient Response
LDO Linear Regulator
Symbol
General Description
The IP1117 is a series of low dropout voltage regulators which can provide up to 1A of output current. The IP1117 is available in four fixed voltages, 2.5V, 2.85V, 3.3V and 5.0V. Additonally it is also available in adjustable version. On chip precision trimming adjusts the refernce/ output voltage to within 2%. Current limit is also trimmed to ensure specified output current and controlled short-circuit current. The IP11117 series is available in SOT-223 and DPAK power packages. A minimum of 10uF tantalum capacitor is required at the output to improve the transient response and stability.
DPAK
SOT-223
Applications
2.85V Model for SCSI-2 Active Termination Post Regulator for Sitching DC/DC Converter High Efficiency Linear Regulator Battery Chargers PC Add on Card
Absolute Maximum Ratings
Parameter
Input Voltage Junction Temperature Storage Temperature
Symbol
VIN(MAX) TJ TSTG
Value
18 -25C ~ +125C -55C ~ +150C
Units
V C C
Electrical Characteristics
( Vin = 5V, Co = 10uF, Ta = 25C, unless otherwise specified) Parameter Symbol Test Condition
Reference Voltage Vref S1117 Only 1.5V < (VIN -VOUT) < 7V, IO = 10mA S1117-1.8 10mA < IOUT < 1A, 3.8V < VIN < 10V S1117-2.5 10mA < IOUT < 1A, 4.0V < VIN < 10V Output Voltage Vout S1117-2.85 10mA < IOUT < 1A, 4.25V < VIN < 10V S1117-3.3 10mA < IOUT < 1A, 4.75V < VIN < 10V S1117-5.0 10mA < IOUT< 1A, 6.5V < VIN <12V
MIn.
1.225 1.764 2.450 2.793 3.234 4.900
Typ.
1.250 1.800 2.500 2.850 3.300 5.000
Max.
1.275 1.836 2.550 2.907 3.366 5.100
Units
V V V V V V
Sep 2002. Rev. 0
1/5
S1117
Electrical Characteristics
( Vin = 5V, Co = 10uF, Ta = 25C, unless otherwise specified) Parameter Symbol Test Condition
S1117 IOUT=10mA, 1.5V < (VIN -VOUT) < 12V S1117-1.8 IOUT = 10mA, 3.8V < VIN < 12.8V S1117-2.5 IOUT = 10mA, 4.0V < VIN < 15V S1117-2.85 IOUT = 10mA, 4.25V < VIN < 15V S1117-3.3 IOUT = 10mA, 4.75V < VIN < 15V S1117-5.0 IOUT= 10mA, 6.50V < VIN < 15V S1117 VIN - VOUT =2V, 10mA < IOUT < 1A S1117-1.8 VIN =3.8V, 10mA S1117-2.5 VIN =4.0V, 10mA S1117-2.85 VIN =4.25V, 10mA < IOUT < 1A S1117-3.3 VIN =4.80V, 10mA < IOUT < 1A S1117-5.0 VIN =6.5V, 10mA < IOUT< 1A Dropout Voltage 1 Dropout Voltage 2 Quiescent Current Ripple Rejection Current Limit Adjust Pin Current Adjust Pin Current Change Minimum Load Current Long Term Stability RMS Output Noise Thermal Shutdown Thermal Shutdown Hysteresis Tsd Thys VDROP1 VDROP2 Iq RR ILimit Iadj Ichg IMin Stable 10mA < IOUT< 1A 1.5V < Vin - Vout < 12V Only S1117 TA = 125C, 1000hrs 10Hz < f < 10kHz Junction Temperature IOUT = 100mA IOUT = 1A V IN < 12V f = 120Hz, COUT = 22uF Tantalum, (VIN - VOUT) = 3V, IOUT = 1A VIN - VOUT = 2V
PRELIMINARY
MIn.
60 1 10 -
Typ.
0.035 1 1 1 1 1 0.05 1 1 1 1 1 1.10 1.2 5 72 1.5 35 0.2 0.03 0.003 150 10
Max.
0.2 3 6 6 6 6 0.5 10 10 10 12 15 1.15 1.25 10 100 5 1.0 -
Units
% mV mV mV mV mV % mV mV mV mV mV V V mA dB A uA uA mA % % C C
Line Regulation
dVOUT1
Load Regulation
dVOUT2
2/5
S1117
Fig 1. Tempearture vs. Quiescent current
6 4
PRELIMINARY
Fig 2. Temperature vs. Ouput voltage
5 3 4
ICC[mA]
VOUT[V]
3
2
2
1
VCC = 5.3[V] VOUT = 3.3[V] Temp. = Variable IO=0[mA]
-20 0 20 40 60 80 100
1
VCC = 5.3[V] VOUT = 3.3[V] Temp. = Variable IO=10[mA]
-20 0 20 40 60 80 100
0
0
Temperature[]
Temperature[]
Fig 3. Temperature vs. Load regulation
100
Fig 4. temperature vs. Drop out voltage
80
VCC = 5.3[V] VOUT = 3.3[V] Temp. = Variable IO=10[mA]
1.4 1.2 1.0
60
VDROP[V]
VLOAD[V]
0.8 0.6 0.4
40
20
0.2
0
VOUT = 3.3[V] Temp. = Variable IO=1.0[A]
-20 0 20 40 60 80 100
-20
0
20
40
60
80
100
0.0
Temperature[]
Temperature[]
Fig 5. IO vs. Load regulation
16 14 12 10 8 6 4 2 0 0.0
VLOAD[mV]
VIN = 5.3[V] IO=variable TA=25[]
0.2 0.4 0.6 0.8 1.0
IO[A]
3/5
PRELIMINARY
S1117
Typical Application
VIN 5V
IP1117-2.5
(3) IN + GND (1) OUT(2)
Vout 2.5V at 1A 22uF
+
10uF
VIN 5V
IP1117
(3) IN + GND (1) OUT(2)
Vout 2.5V at 1A
+
10uF
22uF 125
125
www.semiwell.com
Copyright@SemiWell Semiconductor Co., Ltd., All rights are reserved
4/5
IP1117
Package Dimension SOT-223
PRELIMINARY
D-PAK
5/5


▲Up To Search▲   

 
Price & Availability of S1117

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X